sorodni izrazi in sinonimi v sodobni slovenščini, hrvaščini in srbščini
Podobnost besed in fraz med rezultati je odvisna od tega, kolikokrat se beseda
ali fraza pojavi v podobnem stavčnem kontekstu kot "steels".
Podobni izrazi in sinonimi za
Kliknite za poizvedbo
Primeri iz korpusa
Korpus Common Crawl
Common Crawl je korpus spletnih strani
Will this be the new king of general-purpose stainless cutlery steels?
Understanding these properties will get you started to fundamentally understanding steels and how choice of steel can effect performance.
These steels will usually be stronger than the previous group, and more wear-resistant.
The search for higher-performance steels has to a number of wonderful materials in recent years.
The question of "what's the best steel" or "rank the following steels in order from best to worst" often comes up.
The properties of different steels will be laid out below.
The knifemaker will usually know which steels he can make perform the best.
Study of the origin of the unexpected pearlite during the cooling stage of two cast high-speed steels.
Spheroidizing in steels: processes, mechanisms, kinetic and microstructure -a review.
So work with the maker to understand the choices being made with the different steels being offered.
SV represents the ultimate in wear resistance in the steels discussed so far.
Of course, carbon steels will rust faster than stainless steels, to varying degrees.
Maybe he's particularly good at heat-treating one steel or another, so that the differences between disparate steels are minimized.
It is more stain resistant than the carbon steels mentioned above, however.
In your buying decisions, you might want to take into account the difficulty of sharpening these steels.
In steels, strength is directly correlated with hardness -- the harder the steel, the stronger it is.
In addition, carbon steels can be differentially tempered, to give a hard edge-holding edge and a tough springy back.
In "stainless" cutlery steels, stain resistance is most affected by free chromium -- that is, chromium that is not tied up in carbides.
If you want to make an educated decision about steels, try to learn the basics of steel properties, and go from there.
Heat treater's guide : practices and procedures for irons and steels.