sorodni izrazi in sinonimi v sodobni slovenščini, hrvaščini in srbščini
Podobnost besed in fraz med rezultati je odvisna od tega, kolikokrat se beseda
ali fraza pojavi v podobnem stavčnem kontekstu kot "tensile".
Podobni izrazi in sinonimi za
Kliknite za poizvedbo
Pogosto skupaj z
Primeri iz korpusa
Korpus Common Crawl
Common Crawl je korpus spletnih strani
Upper curve considers the overstrength factor, lower curve shows tensile test results.
Natezna trdnost ("tensile strenght"), ki opisuje kolikšna je največja natezna sila, ki jo zrnce prenese, preden se zlomi.
Geometry and boundary conditions in direct tensile test.
Effect of tensile strength limit on model sample normalized peak strength.
Effect of model shape on stress-strain curve for (a) direct tensile test, (b) uniaxial compressive testand (c) biaxial test models.
Effect of contact tensile strength limit on model sample normalized peak strength.
Effect of applied velocity on crack pattern in direct tensile test model.
Dostopno na svetovnem spletu: <https://www.sciencefacts.net/tensile-stress.html>.
Za tekstilne materiale je pomembna predvsem natezna trdnost / tensile strength / , redkeje tlačna ali torzijska trdnost .
Narobe , gre za natezno napetost / nateg ( ang. tensile stress / tension ) , ki ima glede na tlačno napetost / tlak seveda nasproten predznak .
We empirically searched for the best welding parameters and evaluated welds with tensile tests.
We determined the bending strength, the modulus of elasticity, tensile strength, water absorption, density and thickness.
The tubes for tensile testing and the samples for the measurement of hardness were made from the casting for mechanical testing.
The purpose of this thesis is to create a simple algorithm for estimating tensile strength of beech boards.
The effect of training on the tensile strength of isolated rabbit tendons.
Basic and mechanical properties were determined, among them the crack strength, tear and bending resistance, stiffness and tensile properties of materials.
Alternately heating and cooling causes alternately performing tensile and compressive stresses which results in fatigue of the material.
After the carried out tests the properties compared were tensile strength, flow stress, elongation and hardness of the experimental alloys.
Low-carbon, high-tensile, ki so uporabljani za podmornice imajo povsem isti problem.
Low-carbon = higher tensile-strenght, but low carbon = welding problem.